Polaris RZR 1000 XP Lower Arched Radius Bar

0 Rating
Out of Stock

Free Ground Shipping for $0.00

My Wishlist
Polaris Control Arms

Polaris Rzr

Fits: Polaris RZR 1000 XP, TURBO XP (All Models) (14-17)


Made from 1 1/4" X 3/16" DOM steel tubing, the Max Clearance Series Radius Bar is a beefy addition compared to the OEM bars (3/4") and other competitors (1"). The simple bolt-on kit also features a 5/8" heim joint with a load rated at 17,955 pounds and polyurethane bushings for rugged durability in the deepest ruts and along the rockiest terrain.


When comparing the Max Clearance Series Radius Bar to the competitors, you'll notice that ours give the MOST ground clearance across the entire bar and the most strength. Something you won’t find anywhere else. You didn’t spend $20,000 on the BEST UTV on the market to save a few bucks on a weak link! High Lifter's Max Clearance Series Radius Bar will give you the strength and clearance needed for peace of mind when riding the trails!


  • Extreme arches for maximum ground clearance.
  • 1 1/4" x 3/16" DOM steel tubing
  • 5/8" heim joint with a load rating of 17,955 pounds
  • Polyurethane bushings
  • Simple bolt-on kit
  • Instructions complete with photos for a quick install


  • 2017 Polaris RZR XP 1000 models have two different types of hardware connecting the rear factory radius bars: 10mm or 12mm bolts. Before purchasing radius bars for your 2017 Polaris RZR XP, you need to determine if you have 10mm or 12mm hardware. To determine this will be as simple as finding which socket is used to remove the center bolt holding the radius to the frame. For 10mm hardware you will use a 15mm socket. For 12mm hardware you will use an 18mm socket. This kit does not fit units that have 12mm factory bolts!

Proudly made in the USA!

There are yet no reviews for this product.

Please log in to write a review. Log in